Turbidity Logger Dual Range with wiper

The ATU75W is designed for deployments with a variable range of turbidities.

The robust wiper action means that the sonde can be deplowed for long periods of time without turbidity measurements being compromised by biofouling.

SKU: ATU75W Category:

Introduction

The Dual range logger allows a wide dynamic range of turbidity measurement.

The advantage of the dual range is that accuracy is not compromised with such a wide dynamic range  as accuracy is a % of each sensor full scale range rather than as a % of the total span.

This allows monitoring of very low level turbidity measurements during low tidal movements through to large weather events such as cyclones where water tubulence will lead to elevated turbidity levels. high accuracy is maintained across this wide range of measurements. 

Features

• Low sensitive  and high turbidity sensors

• Resolution of 0.003FTU

• Accurate measurement in open and deep sea

• Calibration performed with formazine solution – concentration shown in FTU and ppm units

Measures

The lower range is from 0 – 1,000 FTU and the upper sensor range is from 1 – 100,000 ppm.

Automatic change over to the other sensoronce the upper limit is reached on the low range sensor or vice versa on the lower limit of teh upper sensor.

Additional information

Method

Infrared backscattering

Range

0 -1, 000FTU 0 – 100, 000ppm

Resolution

0.03 FTU

Measuring Mode

Continuous, Burst or real time

Warm up time

10 s

Wiper

optional

Pressure Rating

200m or (6, 500m)

Weight

1, 080g or(800g)

Brand

JFE Advantech

Model Number

ATU75W