Introduction
Whether for indoor or outdoor use, the WS 316 is an all-rounder that impresses with its generous storage space and expandability. It can be tailored for a wide variety of different sampling requirements and conditions, and can even be
retrofitted later with other equipment. The WS 316 even has room for extended bottle sets.
The vacuum sample collection ensures relable and accurate sample collection from a range of liquid streams including tallow. 8 different distribution systems cater for a range of samplimng collections. Remote control can be via Modem or GSM Modem
Features
- Housing and roof made of durable stainless steel
- Three separate technical compartments in the upper section of the sampler
- to protect the pump, electronics and refrigeration unit
- Freely adjustable and highly accurate temperature control for the sample
- storage chamber, for ambient temperatures from -25°C to +42°C – optionally
- from -40°C up to +55°C
- High-performance vacuum sampling system – alternatively available with
- any other WaterSam sampling system
- Borosilicate glass metering vessel protected in sample storage chamber to
- minimize sample falsication that could stem from temperature extremes
- Hose inlet on the left and right side; optionally from below
- Available with a composite container up to 60 l, or with an XY Distributor for
- direct filling of numerous bottle sets (up to 49 x 1 l or 64 x 350 ml) without
- cross-contamination
- Wide range of optional equipment: housing materials, pumps, valves,
- equipment of challenging sample media and environments,
- sample freezing, etc.
- The sampler can be used with the vacupress sonde to lift samples up to 30m
- Sampling modes: Time, Vol & event proportional Distribution Systems:
- 1x60L, 4x20L, 5x12L, 12×2.9L,+1×10.4L,16×2.9L,24x2L 36x1L
- Software is menu driven to run 9 programmes. storage of errors, events &
- operation status
Measures
Sample Volume per draft: 20-350mL fixed. Total sample volume to 2 litres per aliquot.
