New technology that is able to provide in-situ viewing of microscopic components in an aqueous medium.
The unit can operate either as a flow through cell that can hold a sample or as an open cell.
Ideal for profiling or selective search on a particular water component and capture for surface analysis.
IntroductionThis is the next generation of hybrid anti-biofouling that JFE have developed for the long-term deployment of their sondes. The UV-C ultraviolet light (UV-C) irradiation kit can be attached to the JFE Infinity series of oceanographic sondes. This includes...
To allow for different styles of use, there are 4 types of interfaces available.
a. Pro model:For field use a watertight interface & notebook
b. Smart Handy: A compact data storage"PDA" with touch keypad
c. Chart Recorder: for real in-situ deployment at sea with Colour LCD for night viewing. Also equiped with GPS.
d. Interface Unit: Transforms RS485 to RS232 for comms with a PC.
These instruments are ideal for long-term deployments for up to two years.
Through a convenient computer interface, it is easy to download the recorded data or program the DEFI -T for a variety of sampling strategies without the need to open the sonde.
This sampler is ideal for 24 hour composite sampling,the previous day’s sample being retained for 24 hours before being automatically emptied if not collected. For continuous monitoring of waste water treatment plants (inflow and outflow), industrial plants, rivers, lakes etc.
IntroductionSamplers, customized according to the customer’s specific sampling requirements to take samples from pressurised process lines. Special sampler Vacuum System for monitoring of plants with chemically or mechanically very polluted discharge....
Two models are available with different spans of either 25 or 50 metres.
Temperature is also an optional parameter.
The huge data staorage means the logger can be deployed for long periods.
The final results are printed in a report containing all relevant information including: sample ID, sample OD, date.
Real time results and OD values are visible during the run.
For longer deployments, a new reagent canister can be swapped in, in less than 5 minutes and waste material also removed in the same canister.
Power consumption is minimal and can be supplied from 12volt battery/solar sourcing.
The system can also be used with the Sysmedia data logging system which will deliver on-lne results to a nominated desk top display, via a GSM comms system.
Any WaterSam sampler can be upgraded to a monitoring station by connecting water quality monitoring instruments. A range of sensors and parameters are available to choose from, and measured values can be stored in the controller and easily retrieved. Sensors can be positioned directly in the sample medium source, or installed in a monitoring vessel inside the sampler. Installation in a sampler offers the benefits of protection as well as easy access for cleaning and calibration. The sampler can be set to take samples in case upper and/or lower parameter limits are exceeded. If the sampler is equipped with an XY Distributor or an additional sampling system, event-based samples can be deposited in containers specially reserved for such a case.
We help labs and industry choose, install, and maintain the right equipment—backed by local calibration and service. Contact us to discuss your application, request a quote, or book support.